GreenTec RC 162, Handbook

Page: 28 / 52

28 Hedge Cutter RC 162
Inadmissible working:
The operational reliability of the delivered machine can only be guaranteed if it is used
according to the intended use as described in this manual. The limit value stated in the
data sheets must under no circumstances be exceeded.
The machine is not suited for cutting grass. The machine must never be used for
cutting the “back side” of a hedge, so that the rotating knives are facing the user.
When responsible for the machine always follow the rules below:
•
Always inspect the work area before starting work and remove potentially
dangerous material.
•
Never use the machine close to persons or animals. Read the section ” Safety
distances”.
•
Make sure that all cab covers are secured and that the windows remain closed
during work. If the vehicle has no cab, always wear safety glasses and earmuffs.
•
Only use the machine with the correct speed of the knives.
•
Never approach the machine when it is running, always shut the engine off and
stop the vehicle.
•
Always remove the ignition key when leaving the driver’s seat.
•
Only use the machine for the intended purpose. This machine is solely
constructed for hedge cutting. It must never be used for grass cutting or the like.
•
Lower the machine and set it in a horizontal position, so that there is no access
to the knives when parked or not in use.