11147 Ultra Tugger
®
Adapter Package
Greenlee Tools, Inc.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
7
Setup
Wheeled Carriage
Requires: Adequate clearance.
See “Typical Setups.”
1. Mount the boom mount to the wheeled carriage.
Align the boom mount holes with the top holes
in the wheeled carriage, as illustrated. Install a
pin through the top hole in the boom mount and
wheeled carriage. Secure the pin with a hitch pin
clip. Place a second pin in the lower hole.
2. Set puller on boom mount frame so that the puller
mounting feet sit inside the frame opening, between
the two side rails. Slide the puller up against the
stop and chain it down securely.
For use only with Greenlee Model 640 and 6001 cable
pullers.
Use with other pullers may result in insecure mount-
ing and improper rope alignment.
Failure to observe this warning could result in severe
injury or death.
1st pin
2nd pin
Puller up
against stop
