Energy Recovery Ventilator
5
®
The system design and installation should follow
accepted industry practice, such as described in the
ASHRAE Handbook and SMACNA.
Minimum service clearance should be provided on
the side of the unit for routine service and component
removal should it become necessary.
Before beginning installation see page 3 for detail on
appropriate service clearances.
Hang Mounting with Hanging Vibration
Isolators
• The hanging isolator kit includes four (4) isolators
and required hardware.
• Locate the support rods as shown in the drawing.
• Assemble each isolator as shown.
MiniVent
A
B
C
450
37.6
26.4
19.9
750
43.2
33
23.8
All dimensions are in inches.
Installation
Electrical and Fan Access Panel
(underside)
A
B
C
Hanging Vibration Isolator Assembly
MiniVent-450
Isolator
Big flat washer
Small flat washer
Nut
3/8-inch threaded rod,
provided by others
Big flat washer
Lock washer
Nut
Hanger bracket,
factory-mounted
Small flat washer
Isolator
Flat Washer
Lock Washer
Nut
1/2-inch threaded rod,
provided by others
Flat Washer
Lock Washer
Nut
Hanger bracket,
factory-mounted
Hanging Vibration Isolator Assembly
MiniVent-750
