background image

5

MiniCore

Installation

The system design and installation should follow 
accepted industry practices, such as described in the 
ASHRAE Handbook and SMACNA.

Minimum service clearance should be provided on 
the side of the unit for routine service and component 
removal should it become necessary. 

Before beginning installation see page 4 for appropriate 
service clearances

Hang Mounting  
with Hanging Vibration Isolators

•  The hanging isolator kit includes four (4) isolators and 

required hardware.

•  Locate the support rods as shown in the drawing.

•  Assemble each isolator as shown below.

MiniCore

A

B

C

5

44.8

14

39.4

10

44.8

19.2

39.4

All dimensions are in inches.

A

B

C

Isolator

Flat Washer

Lock Washer

Nut

1/2-inch threaded rod,
provided by others 

Flat Washer

Lock Washer

Nut

Hanger bracket,
factory-mounted

Hanging Vibration Isolator Assembly 

Base Vibration Isolator Assembly

3/8-inch bolt

Factory-mounted
bracket

Lock washer

Flat washer

Isolator

Assembled and Mounted Isolator Detail

Base Mounting  
with Base Vibration Isolation

•  The base isolators kit includes four (4) isolators, 

four (4) brackets and required hardware.

•  Assemble and mount the isolators as shown in the 

figures below.

IMPORTANT

The MiniCore unit can be hung in any orientation.  The 
installation contractor is responsible for safely hang 
mounting the unit to provide appropriate removal or 
the access panels and unit components.

®

Summary of Contents for MiniCore 10













Reviews: