Stationary, Drainable Blade Louver Models
3
®
Single Section Wide x Single Section High Installation
1. Locate the optional extended sill, if provided, and
2. Locate mounting angles and fasteners required to
attach the louver to the structure. Clip angles and
fasteners are by others unless the optional mounting
angles have been ordered from manufacturer with
the louvers. Anchors to the structure are by others
and are not manufacturer provided.
3. Place the louver in the opening and shim around the
perimeter to maintain proper spacing for backer rod
and caulk joint.
4. Using the appropriate fasteners, secure the
mounting angles to the back of the louver frame at
the perimeter.
5. Ensure the louvers is level and in the correct
location within the opening and secure the mounting
angles to the structure using the correct anchor (by
others) for the building substrate material.
6. Once the louver is secured to the structure, install
backer rod and caulk around the perimeter of the
opening at the front of the louver.
Figure 1.1
Figure 1.2
Figure 1.3
