OPERATION
GENERAL OPERATION
(Please see the Terminal and Web Interface sections for more details)
•
The Function is selected using the
+
and
–
buttons.
o
Terminal uses the
+
and
–
keys.
o
Web Interface has dedicated Function buttons.
o
Each function has one or more parameters.
•
Parameters are adjusted using the arrow keys and the Adjust knob.
o
Parameters are selected using the
up
and
down
arrows.
o
Digit to be adjusted is selected by using the
right
and
left
arrows.
o
Use the Adjust knob to increment and decrement the selected digit.
o
Parameter values may be directly entered using the Terminal or Web Interface.
•
Operation of each function is triggered by a variety of methods.
o
Pressing the Adjust button.
o
Receiving a low to high transition on the Trig In jack.
o
Terminal uses the
!
key to trigger.
o
Web Interface has a dedicated Trigger button.
•
Trigger may be single-shot or repetitive.
o
Press the
Repeat
button to toggle the Repeat mode.
o
Terminal uses the
*
key to toggle Repeat mode.
o
Web Interface has a dedicated
Repeat
button.
•
CV Out amplitude can be adjusted from 0 to 100% by a variety of methods.
o
Use the
CV Scale
potentiometer.
o
Terminal uses the
O
key plus up to three digits ranging from 0 to 1023. (Use the
z
key to refresh the screen after setting this parameter to see the result.)
o
Web Interface has a dedicated
Slider
control.
