Greenface Labs THE SPANKULATOR, User Manual

Page: 22 / 22

SETTINGS
The Settings function displays information about the Spankulator as well as allowing some
adjustments to various system parameters. Refer to the table below.
Parameter Min Max Default
Version -- -- Displays version#
Clock Internal External Internal
Encoder Type Normal Reverse Normal
WiFi Enabled Disabled Enabled
Screen Saver 1 9999 15
Reset -- -- Push Trigger
Notes:
1. Version shows the software version number. This is useful when communicating about
bugs and questions.
2. Clock can be set to External. In this case pulse lengths are irrelevant, but the levels at
CV Out will be the same as they would in Internal mode. Feed the External Clock signal
into Trig In.
3. Encoder Type takes the two types of rotary encoder into account. This makes them
easier to purchase if one type is unavailable. If your Adjust knob is working opposite as
it should, this is the setting that corrects it.
4. WiFi can be disabled here if you want to turn it off but retain your password.
5. Screen Saver prolongs the life of the OLED display. The screen will blank after the set
number of minutes. Press any button to bring the display back.
6. Reset brings the Spankulator ’ s parameters back to their factory defaults. Note that
WiFi parameters are unaffected.