BOUNCE
The Bounce function essentially is a Sample & Hold with extended features. Bounce operates
in two modes: DC and AC. It measures the voltage at Sig In when a Trigger occurs and then
“
bounces
”
that voltage, scaled by the Adj knob, to CV Out. It also generates a 732Hz PWM
signal at Trig Out with the duty-cycle proportional to the measurement.
Mode
0% Duty Cycle
100% Duty Cycle
DC
-5V
+5V
AC
0V
10V pk-pk
The basic accuracy of the measurement is 1%
AC is measured as True RMS. For a Sine wave this is
𝑉𝑝𝑘
2∗√2
(Freq: 200Hz
–
2000Hz)