LFO
LFO Spanks send a Sine wave, a Ramp-Up or a Ramp-Down wave to CV Out. They also send a
pulse to Trig Out where the width is equal to the length of the LFO period.
The voltage level at CV Out is 10V peak to peak. This amplitude can be reduced by using the CV
Scale control. The Period is in milliseconds.
Parameter
Min
Max
Default
Period
2
9999
10
Waveform
N/A
N/A
SINE
The figure below illustrates an LFO Spank with the default settings. The yellow trace is Trig
Out and the purple trace is CV Out.
Figure 7 - Default LFO Spank
Notes: When in Repeat mode, the waveform will be interrupted by the system in its basic loop.
This interruption can be minimized by disabling WiFi in the Settings function.
