MAYTAG
Maytag Spanks send a sequence of pulses of random width to Trig Out.
The voltage level at CV Out is proportional to the current pulse width plus or minus a value that
is calculated from the Randomness parameter. The voltage will be at the maximum (+5V) when
the Spank starts and will decrease to the minimum (-5V) when the Spank completes. This
range can be reduced by using the CV Scale control.
Parameter
Min
Max
Default
End Pulse Len
10
9999
10
Start Pulse Len
10
9999
100
Num Pulses
2
99
10
Randomness
0
99
0
Initial Delay
0
9999
100
The figure below illustrates a Maytag Spank with the default settings. The yellow trace is Trig
Out and the purple trace is CV Out.
Figure 6 - Default Maytag Spank
