TOGGLE
Toggle Spanks send a HIGH, LOW or the opposite of what is currently there to Trig Out.
The voltage level at CV Out is set by the user. Hi Level sets the voltage when the output goes
HIGH and Lo Level sets the voltage when low. These voltages can be scaled by using the CV
Scale control.
Parameter
Min
Max
Default
Delay
1
9999
100
Hi Level
0
1023
1023
Lo Level
0
1023
0
State
LO
HI
Toggle
The figure below illustrates a Toggle Spank with the default settings. The yellow trace is Trig
Out and the purple trace is CV Out.
Figure 5 - Default Toggle Spank
Notes: Toggle mode is useful for setting the output to a known state. Trig Out can be set LO,
HIGH or Toggled to the opposite of what it currently is. The levels at CV Out can be set in a
similar fashion to Stretch Spanks.
