www.GreenSeriesFitness.com
©June 2015
Call Toll free (800) 269-7130
CIR-EL7000E-G Revision 1.1
15
The Safety of the equipment can be maintained only if the equipment is examined regularly for
damage or wear. If maintenance is required, keep the equipment out of use until defective parts
are repaired or replaced.
Pay special attention to parts that are subject to wear as outlined in the
Preventative Maintenance
Schedule.
The following preventive maintenance will keep the exercise elliptical operating at peak
performance
：
●
Locate the exercise elliptical in a cool, dry place.
●
Clean the top surface of the pedals regularly.
●
Keep the display console free of fingerprints and salt build-up caused by sweat.
●
Use a 100% cotton cloth, lightly moistened with water and mild liquid cleaning product, to
clean the exercise elliptical other fabrics, including paper towels, may scratch the surface.
Do not finger to press the selection buttons on the console.
●
Clean the housing thoroughly on a regular basis.
NOTE
：
：
：
：
Before use the elliptical, please make sure the Aluminum tracks are cleaned and lubricated, this is
to prevent the damage and noise on tracks when you are exercising.
The exercise elliptical can be wiped clean with a soft cloth and mild detergent.
Do not use
abrasives or solvents
. To prevent damage to the console, keep liquids away from the console
and keep the console out of direct sunlight.
Preventative Maintenance Schedule
Follow the schedule below to ensure proper operation of the product.
ITEM
WEEKLY
MONTHLY
BI-ANNUALLY
ANNUALLY
Display Console
C
I
Console Mounting Bolts
I
Accessory Tray
C
I
Frame
C
I
Plastic Covers
C
I
Pedals and Straps
C
I
KEY
：
C=Clean; I=Inspect
Hand pulse
Before/after running, to put your feet separately on each side rein,
then hold the hand grip, so as to avoid any shaking. If the heart beat
is too high or irregular, please have your hands out of the hand grip
until the pulse display returns to " 0 ", then redoing the test.
Don't do this test while running.
