10
USE OF GLASS WIPER TOOL (Ref. 10)
INSTRUCTION FOR END OF USE
USE OF ACCESSORIES
1.
Engage safety lock.
2.
Disconnect from the power source.
3.
Store the unit in a dry, safe place.
4.
If you intend not to use the unit for any length of time ensure that the water tank
is completely empty.
Steam jet selector: The unit is supplied as standard with the steam jet selector (Ref. 1 Pos. G),
which allows you to select:
1.
Concentrated steam (Ref. 8A).
2.
Diffused steam (Ref. 8B).
The unit is also supplied with the following accessories:
Curved Jet nozzle:
For cleaning areas that are hard to reach and for removing stubborn dirt.
Brush: To be fitted on curved jet nozzle for removing very stubborn dirt or stains.(Ref. 7)
Glass wiper tool: For the cleaning of glass, mirrors and shiny surfaces.
All accessories are equipped with snap-on connectors for ease of use and
changeability .(Ref. 9)
Warning:
- When changing ensure that the accessory is fitted firmly.
- Before you disconnect the accessory from the Gun, make sure that no steam comes
out of the nozzle.
1.
Spread steam evenly over the glass.
2.
Clean with sponge.
3.
Wipe with blade.
If needed the glass wiper tool can be fitted to the steam gun.
Warning: Thermal shocks can shatter glass. We recommend not to clean very cold or
frozen glass with steam until the surface has been warmed by directing the
steam jet on the glass from a distance of at least 10-15 cms (4-6 inches).
