background image

4

USER MANUAL - URBAN RYDER™ 

www.greenlightcycle.com

1-855-GRN-RYDE  

(1-855-476-7933)

ASSEMBLY  INSTRUCTIONS  

Congratulations on receiving your Urban Ryder™ Electric Bicycle! 

Open the box from the top by cutting the 3 bands and the packaging tape.  Carefully remove the 3 styrofoam packing 

blocks.  

Remove the front wheel before removing the bicycle.  

Remove the bicycle by lifting it straight out of the box (may 

require 2 people).  Be careful not to scratch yourself or the bike on the carton.  Stand the bike on a clean flat surface and 

remove the styrofoam packing material strap tied to the frame and various parts.  Be careful not to scratch the bike or cut 

yourself when snipping the strap ties.  Be sure to keep any small packages of parts and paperwork that come with the bike.  

Check all contents to ensure you have each part required for assembly.

Box Contents:

1 x Bike Frame with Rear Wheel Attached

1 x Front Wheel 

2 x Pedals (Left & Right)

1 x Lithium Battery 48 Volts 10Ah

2 x Battery Keys

1 x 120 Volt Charger

1 x Seat

1 x Tool  Kit:  5 x Hex Wrenches (2mm, 3mm, 4mm, 5mm, 6mm)

 

3 x Wrenches, double sided (8mm & 10mm, 13mm & 15mm, 14mm & 17mm)

 

1 x Screwdriver, double sided (star & slot configuration)

1 x King Meter® Owner’s Manual 

1 x Shimano® Gear and Tektro® Brake Data Sheets

1 x Green Light Cycle Owner’s Manual

Now that you have your bike out of the box and unpacked, it is time to charge the battery.  Please refer to the  

Battery 

Removal & Installation, Precautions, Charging, and Storage

 instructions on page 10.  It is better to remove the battery from 

the bike for the first charging as this will make the bike assembly easier, with no cords in your way.

Assembly Instructions

Battery Lock

Unlock the battery with the key by inserting the key in the bottom lock close to 

the frame.  Turn the key one half turn counter clockwise to unlock and remove 

the key.  Pull the battery straight up by the folding handle to remove from the 

bike.  Follow the charging instructions to complete the battery to full charge.   

Reinstall the battery into the bike after you have completed the bike assembly. 

WARNING: 

Please keep the keys to your electric bicycle in a safe place. Each set of keys are unique to  

your particular electric bicycle and 

we do not keep a copy of your key on file.

!

!

Summary of Contents for Urban Cruzer

























Reviews: