Green-Go GGO-MCXD, User Manual

Page: 17 / 20

page 17 of 20 Copyright © 2020 Green-GO
MCXD user guiDe
GO
– Send Hold Chn 1-32 // Send a Hold cue to the selected channel
– Send Go Chn 1-32 // Send a Go cue to the selected channel
– Normally Closed/Normally Open // Set the Normal state of the switch
– Normal Open: then the switch is not activated except when the condition is met.
– Normal Closed: then the switch is not deactivated except when the condition is met.
– In 2: //Settings for GP input 2
– Same as In 1
– Out 1: //Settings for GP Output 1
– Exit// Go Back
– Func: //Select what function should trigger the switch connected to Output 1 Active, Call, Cue
Receive, Talk
– Option: //Specify the action causing the trigger
– When Func = Active : Any Channel, Channel 1 – 32 // Activity on any channel or a specific
channel
– When Func = Call : Any Channel, Channel 1 – 32 // A Call on any channel or a specific channel
– When Func = Cue Receive: Hold, Hold Blink, Att, Att Blink, Go, Go Blink, Hold/Att, Hold/Att
Blink, Hold/Go, Att/Go
– What kind or kinds of Cue status’ should trigger the switch and how. When the selected con-
dition is received then it will either be active or blink
– When Func = Talk: Any Channel, Channel 1 – 32 // Locally enabled Talk on any channel or a
specific channel
– Normally Closed/Normally Open //What is the Normal state of the switch
– Normal Open: then the switch is not activated except when the condition is met.
– Normal Closed: then the switch is not deactivated except when the condition is met.
– Test: //Test if hardware connection works without having the FOption occurring. -, Closed,
Open,
– Out 2: //Settings for GP Output 2
– Same as Out 1
– Set User: //Select the user to be used with for the device
– Cancel//Go Back
– ’User A - Z’
– Connection: //Set the connection type for the device to use.
– When entering this menu you will go to the menu of the selected connection type, which is either: Local
connection, Remote connection or Master connection.
– Local Connection: Local Connection is normal operation
– // A click here will send you to Local/Remote/Latency/Master connection choice menu.
– Save //Save settings
– Cancel //Go Back
OR
– Remote Connection: //Remote connection is used when connecting to a remote site via a Bridge at that
location. The device becomes a complete member of that location.
– // A click here will send you to Local/Remote/Latency/Master connection choice menu.
– Password: //Set the password for the connection
– Turn knob to scroll, click turn knob to select, Tool key exits.
– Enter password; 8 digits available,A-Z,a-z,0-9,!,@,#,$,%,^,&,*,(,),
– Generate Password://Selects random password
– Remote Port: // Select remote port
– Turn knob to scroll, click turn knob to select, Tool key exits.
– Remote IP: 0.0.0.0 //Select remote IP
– Turn knob to scroll, click turn knob to select, Tool key exits. Backup: Off //If enabled and the con-