‘Orion Range’
Infra-red Motion Detector - Ceiling Mounted
Model: OD102
Important Safety Instructions
• Please read these instructions carefully before installation and keep safe for
future reference.
IMPORTANT
This product should be installed by a competent person and in accordance
with the current IET Wiring Regulations and Building Regulations.
If in doubt,consult a qualified electrician.
• Always turn off the mains supply before commencing work.
Dia:1
1. Remove the cover by rotating anti-clock wise.
2. Connect the mains in and load out wires according to Dia:1.
Switch the mains supply OFF first to prevent electric shock.
N = Neutral ‘IN’
L = Live ‘IN’
A = Output to Load
This product uses an infra-red heat detector. The detector senses ‘warmth movement’ in the
surrounding area when it is dark. When movement is detected the sensor is activated and
triggers the connected load. It has a built in photo-cell that can identify day and night.
Poor Sensitivity
FIELD OF DETECTION
Good Sensitivity
Detection from
Above
As the detector responds to changes in temperature, avoid the following
situations:-
• Avoid pointing the detector towards objects with highly reflective surfaces,
such as mirrors etc.
• Avoid mounting the detector near heat sources, such as heating vents, air
conditioning units, lights etc.
• Avoid pointing the detector towards objects that may move in the wind,
such as curtains, tall plants etc.
INSTALLATION
Note:
Please refer to Data Sheet on the GreenBrook website -
www.greenbrook.co.uk for wiring sensor in parallel.
OD102 Ins Aug 21_GU10 21/02/2022 16:42 Page 1
