IMPORTANT
This product should be installed by a
competent person and in
accordance with the current IET
Wiring Regulations. If in doubt,
consult a qualified electrician.
Electricity is dangerous and an RCD
must not be used as a substitute for
normal precautionary measures.
Always disconnect from mains supply
before any inspection or repair to
equipment is carried out. Do not
allow children to tamper with
electrical devices.
This device will protect against live
and neutral leakage faults to earth, it
will not protect against electric shock
due to contact with both
conductors, short circuits between
live and neutral, or a fault in the
wiring supply to this device.
This a Type AC RCD.
Type AC RCD should not be fitted
upstream of a Type A RCD as the
load characteristics of a Type A RCD
could then impair operation of the
Type AC RCD.
TO FIT THIS SAFETYSURE RCD SOCKET –
Switch off the power supply at the
mains in order to isolate the existing
socket. Remove the old socket, then
for the Unswitched models
M22W
and
M22M
simply connect using the
wiring diagram below.
Or for switched sockets
M22SW
and
M22SM
follow the diagram below.
If earth conductors are bare, they
must be sleeved with appropriate
green/yellow sleeving.
If you are in any doubt about
connecting this product consult a
qualified electrician.
Blue(N)
Brown(L)
Green/Yellow(E)
Installation Instructions for
SafetySure Twin RCD Socket
M22W, M22M & Switched versions
M22SW, M22SM
Blue(N)
Brown(L)
Green/Yellow(E)
E
L
N
E
M22W M SW SM Ins Apr 21.qxp_M22W Instructions 21/04
