manualshive.com logo in svg

Gree XE72-44/E, Owner'S Manual

Share
Download
Gree XE72-44/E Owner'S Manual Download Page 16

3.13  X-fan Setting

13

Notes:

①

Fig.15 X-fan Setting

②

X-fan function setting is as shown in Fig.15

Wired Remote Controller XE72-44/E

. 

X-fan function is unavailable in the Fan or Heating mode.

remote controller, the indoor fan will run at the low fan speed for 2 min, with “X-FAN” displayed on 
the LCD. While, if the X-fan function is deactivated, the indoor fan will be turned off directly.

Wi

Fi

X-fan function: After the unit is turned off, the water in evaporator of  indoor unit will be 

automatically evaporated to avoid mildew.

In the Cooling or Dry mode, press FUNCTION till the unit enters the X-fan setting interface and 

then press SWING/ENTER to active this function.

When the X-fan function is activated, press FUNCTION to the X-fan setting interface and then 

press SWING/ENTER to cancel this function.

. 

When the X-fan function is activated, if turning off the unit by pressing ON/OFF or by the

Wi

Fi

Wi

Fi

Wi

Fi

Press “FUNCTION” button into X-fan state

on X-fan function

Press “FUNCTION” button into X-fan state

Press “SWING/ENTER” button to turn

on X-fan function

Press “SWING/ENTER” button to turn

off X-fan function

Wi

Fi

Summary of Contents for XE72-44/E






























Reviews:

No comments

Brands by name

Popular brands

Load more brands