Multi VRF Floor Standing Indoor Unit
15
remotely control related functions of indoor unit or conduct shielding to make the
operation invalid, thus realize long-distance control function.
②
Long-distance shielding function can be divided into full shielding and partial shielding.
When it is in full shielding, all the remote control or operation by pressing buttons to the
indoor unit will be invalid. If it is in partial shielding, the remote control or operation by
pressing buttons to the shielded function of indoor unit will be invalid.
③
When long-distance monitor or centralized controller conduct long-distance shielding to
indoor unit, if the user wants to remotely control or operate the unit by pressing buttons,
the “88” LED will flicker and display “Ay” to remind the user that it is under long-distance
shielding status.
7 The Best Usage Method
(1)
Adjust the set temperature properly in proper to prevent electricity wasting. It is better tocontrol the
difference of the indoor and outdoor temperatures within 5°C.
(2)
The better effect will be maintained by adjusting the guide louver downward for heating and horizontal for
cooling.
(3)
When the air conditioner is running, don’t open windows or doors for long time, otherwise the efficiency of
unit will be lowered.
(4)
Prevent the cooled air blowing to body directly for long time and making indoor temperature too low, for it
is bad for health.
(5)
Do not pour water to unit or clean it by water, otherwise a malfunction or electric shock may happen.
(6)
Do not mangle the power cord and the communication cord. The damaged power cord and
communication cord can only be replaced by the specified ones.
(7)
This air conditioner allows voltage fluctuation within±10%.
(8)
This air conditioner cannot be used for drying clothes and refrigerating food, etc..
8 Maintenance Method
Warning
：
(1)
Do turn off the unit and cut off the power when cleaning the air conditioner, otherwise electric shock may
happen.
(2)
Do not make the air conditioner wet or electric shock may be incurred; Ensure that the air conditioner will
not be cleaned by water rinsing under any circumstance.
(3)
Volatile liquid like thinner or gasoline would damage the appearance of the air conditioner. (Only soft dry
cloth and wet cloth moistened with neutral detergent could be used to clean the surface panel of the air
conditioner.)
8.1 Cleaning panel
Note
：
Do take down it before cleaning.
(1)
Pull along the direction of arrows to take down the panel.
(2)
Clean the panel
Clean it with a soft-hair brush, water and neutral cleaning fluid, and then dry it.
Caution
：
Do not use water above 45°C to wash the panel to prevent decoloration or deformation.
(3)
Install the panel
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
