GMV DC Air Handler
7
4 Installation Instructions
4.1 Dimension Data
Fig.4.1.1
Unit: mm(inch)
Model
Dimension
W
D
H
A
B
GMV-ND09A/B-T(U)
460(18-1/8)
540(21-1/4)
1105(43-1/2)
295(11-5/8)
426(16-3/4)
GMV-ND12A/B-T(U)
460(18-1/8)
540(21-1/4)
1105(43-1/2)
295(11-5/8)
426(16-3/4)
GMV-ND18A/B-T(U)
460(18-1/8)
540(21-1/4)
1105(43-1/2)
295(11-5/8)
426(16-3/4)
GMV-ND24A/B-T(U)
460(18-1/8)
540(21-1/4)
1105(43-1/2)
295(11-5/8)
426(16-3/4)
GMV-ND30A/B-T(U)
460(18-1/8)
540(21-1/4)
1105(43-1/2)
295(11-5/8)
426(16-3/4)
GMV-ND36A/B-T(U)
540(21-1/4)
540(21-1/4)
1224(48-1/4)
295(11-5/8)
508(20)
GMV-ND42A/B-T(U)
540(21-1/4)
540(21-1/4)
1224(48-1/4)
295(11-5/8)
508(20)
GMV-ND48A/B-T(U)
630(24-3/4)
540(21-1/4)
1448 (57)
295(11-5/8)
508(20)
GMV-ND54A/B-T(U)
630(24-3/4)
540(21-1/4)
1448 (57)
295(11-5/8)
508(20)
GMV-ND60A/B-T(U)
630(24-3/4)
540(21-1/4)
1448 (57)
295(11-5/8)
508(20)
4.2 Location
4.2.1 Unit Inspection
Upon delivery, inspect the unit for damage. Any damage must be reported immediately to the
carrier. Do not install such an equipment damaged by freight which determines the integrity and
safety of the unit.
Please check the equipment model number to ensure the unit is appropriately sized for the
condensing unit.
If an incorrect unit is supplied, it must not be installed and it is to be returned to the supplier. The
manufacturer assumes no responsibility for the installation of incorrectly delivered units. The
evaporator coil contains high-pressure inert gas for holding charge.
4.2.2 Installation Site
A place where cool air can be distributed throughout the room.
A place where condensation water is easily drained out.
A place that can bear the weight of indoor unit.
A place which is easy for maintenance.
Summary of Contents for GMV-ND09A/B-T
Page 24: ......
