INSTALLATION GUIDE
ETAC IR REMOTE CONTROL SYSTEM
Introduction:
These instructions cover the installation and operation of the ETAC IR Remote
Control System.
Contents:
Remote Control
IR Receiver
WARNING
DISCONNECT ALL ELECTRICAL POWER TO UNIT BEFORE
INSTALLING
ETAC IR REMOTE CONTROL SYSTEM. FAILURE TO DO SO MAY CAUSE
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
Installation
Procedure
:
out at the bottom (1) and then lift up (2).
connector
on the
front face of the electrical control box.
GREE ELECTRIC APPLIANCES, INC.OF ZHUHAI
Page 1
Step 2:
Locate
IR Receiver module mounting holes and electrical
Step 1:
Remove front panel from ETAC unit by pulling front panel
