11
❏
5. Use a side cutter or Moto-Tool to cut the screws fl ush
with the surface of the plywood.
❏
6. Mount the motor to the motor mount with four 6-32 x 1/2"
[13mm] machine screws, #6 washers and #6 lock washers.
Be sure to apply a drop of threadlocker to each screw. Plug
the motor into the ESC.
Mount the Battery
IMPORTANT:
If powering your Escapade with an electric
motor, before experimenting with different motor battery
combinations and connecting multiple battery packs with
adapter plugs, refer to the
Battery Precautions
on page 22.
❏
Cut pieces of the self-adhesive hook-and-loop material and
place the hook side as shown. Each of your battery packs
should have the a strip of the loop material on them to hold
the battery in place. Slide the nonadhesive hook-and-loop
straps into the slots in the tray as shown. When you insert the
battery into the fuselage, tighten the straps around the battery.
