GREAT PLAINS Yield-Pro YP4025A-48TR20, Operator'S Manual

Page: 93 / 190

YP4025A-48TR20 Table of Contents Index Adjustments 89
2019-03-19 Table of Contents Index 411-198M
Removing a Seed Disk
Refer to Figure 101
1. Remove rain cover. If seed is present, close
shutter to prevent more seed from entering meter.
Attach funnel (page 108).
2. Hold seed disk in meter. Rotate disk clamp
counterclockwise 45

to release disk.
3. Tilting top of disk toward meter, slowly remove disk,
allowing seed to collect in funnel. Open shutter to
release remaining seed up to wing tube.
4. Clean seed from all brushes. Clean disk seat ( in
Figure 98 page 88), so that new disks can seat fully.
Inspect brushes for excess wear and damage. See
“ Meter Brush Maintenance ” on page 111.
5. Inspect removed disks for excess wear and damage.
Set aside any disks requiring replacement. Clean
other removed disks and place in storage. See
“ Seed Disk Maintenance ” on page 113.
6. Re-install the rain cover (page 86).
Sprocket Indexing (Stagger)
If you are planting:
• twin-row crops,
• at seed interval spacings above 6
1
/
2
inch (16.5 cm),
you can synchronize each pair of adjacent meters in a
twin row so that you achieve the maximum seed-to-seed
spacing between the units of the pair.
Refer to the Seed Rate manual for details.
Figure 101
Remove Disk
29611
3
1
4
4
1
2
28420
.tif
600 dpi