YP4025A-48TR20
Important Safety Information
5
2019-03-19
411-198M
Practice Safe Maintenance
Understand procedure before doing work. Use proper
tools and equipment. Refer to this manual for additional
information.
Work in a clean, dry area.
Lower the product, put tractor in park, turn off engine,
and remove key before performing maintenance.
Make sure all moving parts have stopped and all system
pressure is relieved.
Allow product to cool completely.
Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on
product.
Inspect all parts. Make sure parts are in good condition
and installed properly.
Remove buildup of grease, oil or debris.
Remove all tools and unused parts from product before
operation.
Safety At All Times
Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on
the safety decals.
Be familiar with all product functions.
Operate machinery from the driver’s seat only.
Do not leave product unattended with tractor engine
running.
Do not stand between the tractor and product during
hitching.
Keep hands, feet and clothing away from power-driven
parts.
Wear snug-fitting clothing to avoid entanglement with
moving parts.
Watch out for wires, trees, etc., when folding and raising
product. Make sure all persons are clear of working area.
