GREAT PLAINS Yield-Pro YP4025A-48TR20, Operator'S Manual

Page: 68 / 190

2019-03-19 Table of Contents Index 411-198M
YP4025A-48TR20 Table of Contents Index Operating Instructions 64
Field Operation
Perform all steps in “ Pre-Start Checklist ” on page 25
and “ Field Set-Up Checklists ” on page 62.
First Pass Operation Checklist Page
1.
Set tractor 3-point hitch to “depth control”
operation (and not load control)
-
2.
Unfold marker on next-row side. 65
3.
Set fan hydraulic circuit to low flow, engage
circuit. Gradually adjust fan hydraulic flow
to obtain recommended initial fan rpm.
47
4.
Prime meters with seed.
Leave fan running.
51
5. Engage hydraulic seed drive via seed
monitor. Refer to seed monitor manual.
-
6.
If product has a fertilizer system integrated
with the DICKEY-john seed monitor, set the
“Fert.Pump” switch on the Clutch Folding
Module to ON.
61
7. In the CLUTCH cluster of the Clutch
Folding Module, set all switches, including
Master, to ON.
50
8. Pull forward, lower product, and begin
planting for a short distance.
9.
Stop. Assess:
•
planting depth
•
seed spacing
•
press wheel operation
•
fertilizer application (if in use)
10.
Make necessary adjustments 69
Sharp Field Turns Checklist Page
1.
Fold marker 66
2.
Raise product 28
3.
Make turn
4.
Lower product 28
5.
Unfold marker on next-row side. 65
6.
Resume planting.
Suspending Planting Checklist Page
1.
Stop tractor
2.
Fan hydraulic circuit to Float or Neutral 46
3.
Fold Marker 66
4.
Raise product 28
Ending Planting Checklist Page
1.
Suspend operations as above, then
2.
Install lift locks 30
3.
Set caster locks to ROAD 32
4.
Fold product 31
5.
Lights ON -
6.
Transport 34
Ending Planting Checklist Page