Great Plains
| 596-224M | 3/22/19
2
SS0300
Equipment Identification
Introduction
Great Plains welcomes you to its growing family of new
product owners. Your product SS0300 has been
designed with care and built by skilled workers using
quality materials. Proper setup, maintenance, and safe
operating practices will help you get years of satisfactory
use from the machine.
Before placing the machine into service for the first time,
read and understand this manual, in particular the
”, pages 3 to 8. Have all
operators read this manual before allowing them to work
with the machine.
Description of Unit
The SS0300 Inline Ripper is a one-section machine. It is
designed to break up soil crust on hard dried fields while
eliminating compaction layers. An optional berm
conditioner may be added to the rear of each shank.
Using This Manual
This manual will familiarize you with safety, hitching,
operation,
adjustments,
troubleshooting,
and
maintenance. Read this manual and follow the
recommendations to help ensure safe and efficient
operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Document Family
Definitions
Safety admonishment signal words are described on
page 3.
The following terms are used throughout this manual.
Identifies an Economic (not a Safety) Risk:
NOTICE provides a crucial point of information related to the
current topic. Read and follow the instructions to avoid damage
to equipment and ensure desired field results.
This form sets off useful information related to the
current topic, or forestalls possible
misunderstanding.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer.
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
Null4:
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2. If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance contact Great Plains via the Agent
recorded on page 2, or at:
Further Assistance
Great Plains Manufacturing, Inc. wants you to be
satisfied with you new Sub-Soiler. If for any reason you
do not understand any part of this manual or are
otherwise dissatisfied with the product please contact:
Great Plains Service Department
1525 E. North St.
P.O. Box 5060
Salina, KS 67402-5060
Or go to www.greatplainsag.com and follow the contact
information at the bottom of your screen for our service
department.
Null4:
Figure 4
SS0300 Sub-Soiler
42286
L
R
U
D
F
B
L
R
596-224M
Operator Manual (this document)
596-224P
Parts Manual
U
D
F
B
L
R
