GREAT PLAINS SS0300, Original Instructions Manual

Page: 20 / 50

Great Plains | 596-224M | 3/22/19 Table of Contents Index 16
SS0300 Table of Contents Index Operating Instructions
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity, and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Pre-Start Checklist
Perform the following steps before transporting the
product product to the field.
 Carefully read “ Important Safety Information ” on
page 3.
 Lubricate product as indicated under “ Lubrication ”
on page 20.
 Check all tires for proper inflation. “ Tire Inflation
Chart ” on page 23
 Check all bolts, pins, and fasteners. Torque as
shown in “ Torque Values Chart ” on page 23.
 Check product for worn or damaged parts. Repair or
replace parts before going to the field.
 Check hydraulic hoses, fittings, and cylinders for
leaks. Repair or replace before going to the field.
Field Operation
You may be severely injured or killed by being crushed
between the tractor and implement. Do not stand or place any
part of your body between implement and moving tractor. Stop
tractor engine and set park brake before installing pins.
1. Hitch implement to a suitable tractor.
2. Check to be sure machine is running level from front
to rear when running machine at depth desired. See
“ Front to Rear Leveling ” on page 13
3. Adjust gauge wheels to desired tillage depth. See
“ Gauge Wheel Adjustment ” on page 14.
4. Adjust and align coulters to desired tillage depth.
“ Coulter Alignment ” on page 14
5. Always lift implement out of the ground when turning
at field ends and for other short-radius turns.
6. Both the Auto reset and Rigid shank mounts are pro-
tected by shear bolts for extreme overloads. If the
shank bolt shears replace the lower bolt with the cor-
rect shear bolt, use GP part number 802-060C.
(HHCS 5/8-11 x 4 Gr5).
High Pressure Fluid Hazard:
Relieve pressure and shut down tractor before connecting,
disconnecting or checking hydraulic lines. Use a piece of
paper or cardboard, NOT BODY PARTS, to check for leaks.
Wear protective gloves and safety glasses or goggles when
working with hydraulic systems. Escaping fluid under pressure
can have sufficient pressure to penetrate the skin causing
serious injury. If an accident occurs, seek immediate medical
assistance from a physician familiar with this type of injury.