GREAT PLAINS SPARTAN II Operator'S Manual Download Page 58

Page: 58 / 131

Spartan

607

Table of Contents

Index

Operation

Great Plains | 166-486M | 2020/10/08

Tap

to begin the corresponding hopper’s

calibration routine.

6. From the meter calibration screen, make sure

that  hydraulic  flow  to  the  motors  is  on  if  using
hydraulic  motors.  Enter  your  desired  travel
speed.
You  can  tap

to run one test revolution with

the speed selected.

7. Tap to run the calibration. If the calibration is in

the process of running, you should see the
following calibration running screen:

This screen will automatically go to the

calibration confirmation screen once you

have finished running the machine

calibration.

8. Remove the calibration bag and scale from the

drill. Hang the scale (1) on the hook (2) provided
on the right

hand front corner of the cart frame.

Hang the empty calibration bag on the scale.
Zero the scale.

9. Locate the metering hose (3) at the rear of the

drill. There is one metering hose for each meter
on the drill. Select the metering hose for the
meter being tested. Install the calibration bag (4)
on the metering hose.

10. Move the calibration slide (5) for the metering

hose to the open position.

11. Start the tractor engine and start the fan. Set the

fan speed. See “

Air System Adjustments

” on

page 40.

68819

38292

38290

Summary of Contents for SPARTAN II




































































































































Search results

Summary of Contents for SPARTAN II

Reviews:

GREAT PLAINS SPARTAN II, Operator'S Manual, Page: 58 / 131

Search results

Summary of Contents for SPARTAN II

Reviews: