GREAT PLAINS NP2540 Operator'S Manual Download Page 149

Page: 149 / 196

NP2540

Table of Contents

Index

Options

145

2019-04-12

Table of Contents

Index

417-459M

Compact Drop Rear Hitch

This option provides a rear hitch at frame center-line.

Shiftable Rear Hitch Assembly

This option is intended for use with fertilizer applicators

that might be converted to side dress. It provides hitch

receivers at frame center-line, and at side dress swath

center-line.



MonTag Connection Kit 417-516A is available for use

on Van I, 20-series coulter machines.

Nurse Tank Light Harness

For extra safety in the field, this harness provides an

SAE J560b 7-pin receptacle at the applicator rear hitch

(option), interconnected with the applicator lighting

system.

Loss of Control / Braking Hazards:

Do not use the lighting harness for highway transport of nurse
tanks or trailers behind an applicator. At transport speeds on

roads, an urgent or emergency deceleration will result in a

“jackknife” upset of a trailer. Even normal braking above field
speed risks loss of control. The entire train can exceed the

braking capability of the tractor, particularly if a full tank is

towed. An accident is likely to result in serious injury or death,
and major equipment damage.

Rear Hitch Package

Accessory Kit

Drop Rear Hitch Assembly

407-722A

Rear Hitch Package

Original

Option

Accessory

Kit

30-inch Shiftable Rear Hitch

417-317S

20-inch Shiftable Rear Hitch

417-409S

Lighting Harness

Accessory

Kit

Nurse Tank Light Kit

417-357A

36284



Compatible with 2014+ Nutri-Pro

applicators, and

earlier models having an LED lighting system.

Requires an applicator rear hitch (not included - drop

or high-clearance hitches are compatible).

Summary of Contents for NP2540





































































































































































































Search results

Summary of Contents for NP2540

Reviews:

GREAT PLAINS NP2540, Operator'S Manual, Page: 149 / 196

Search results

Summary of Contents for NP2540

Reviews: