GREAT PLAINS 3S-3000HD, Operator'S Manual

Page: 43 / 116

Great Plains Manufacturing, Inc.
Table of Contents Index Operating Instructions 39
2019-03-12
Table of Contents Index
195-068M
Initial Seeding Depth
Refer to Figure 35
12. Set opener seeding depth by adjusting press-wheel
height . To adjust, first raise openers slightly, then
lift and slide T-handles on top of openers Adjust all
press wheels to the same height. T handles adjust at
1

4
in (6.4mm) seeding depth change per minimum
handle step.
• For more shallow seeding, slide T handles forward
toward implement.
• For deeper seeding, slide T handles backward
away from implement.
13. While seeding, remember:
• Raise openers before turning. Never back up or
turn sharply with openers in the ground. Doing so
will plug openers and may damage equipment.
• Check periodically for plugged openers and
hoses.
For information on opener adjustments, “ Row Unit
Adjustments ” on page 54. For information on
troubleshooting opener problems, see
“ Troubleshooting ” on page 63.
FigureSpacer
FigureSpacer
Figure 35
Initial Opener Depth
26441
1
2
B
F
1
2
F
B