GREAT PLAINS 3N-3010, Operator'S Manual, Page: 30 / 118

26Great Plains | | 4/22/19 Table of Contents Index Great Plains | 26
196-366m Table of Contents Index Operating Instructions
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Prestart Checklist
Escaping fluid under pressure can have sufficient pressure to
penetrate the skin. Check all hydraulic lines and fittings before
applying pressure. Fluid escaping from a very small hole can
be almost invisible. Use paper or cardboard, not body parts,
and wear heavy gloves to check for suspected leaks. If injured,
seek medical assistance from a doctor that is familiar with this
type of injury. Foreign fluids in the tissue must be surgically
removed within a few hours or gangrene will result.
1. Carefully read “Important Safety Information,” page i.
2. Lubricate drill as indicated under “Lubrication,” page
lvi.
3. Check all tires for proper inflation. See “Appendix,”
page cvii.
4. Check all bolts, pins and fasteners. Torque as shown
in “Appendix,” page cvii.
5. Check drill for worn or damaged parts. Repair or
replace parts before going to the field.
6. Check hydraulic hoses, fittings and cylinders for
leaks. Repair or replace before going to the field.
7. Rotate both gauge wheels to see that the drives are
working properly and free from foreign material.