2N-2410 & 2N-3010
Important Safety Information
5
8/2/18
196-126M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
Read and follow decal directions.
Keep lights in operating condition.
Keep all safety decals clean and legible.
Replace all damaged or missing decals. Order new decals
from your dealer. Refer to this section for proper decal
placement.
When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1.
Clean the area on which the decal is to be placed.
2.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Reflector: Slow Moving Vehicle (SMV)
(2N-2410 S/N C1977-)(2N-3010 S/N D2485-)
818-055C
At rear of drill when folded
1 total
Reflector: Slow Moving Vehicle (SMV)
(2N-2410 S/N C1978+)(2N-3010 S/N D2486+)
818-055C
At rear of mainframe.
1 total
12945A
Direction of travel
Main Frame
68478
