Great Plains
| 118-732M | 4/4/19
14
1510P & 1520P
Introduction
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel,
repair parts and equipment specially designed for Great
Plains products.
Refer to Figure 1
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial-number plate
is located on the main frame tube on the left end of the
drill.
Record your drill model and serial number here for quick
reference:
Model Number:__________________________
Serial Number: ___________________________
Further Assistance
Great Plains Manufacturing, Inc. and your Great Plains
dealer want you to be satisfied with your new 1510P &
1520P. If for any reason you do not understand any part
of this manual or are otherwise dissatisfied, please take
the following actions first:
1.
Discuss the matter with your dealership service
manager. Make sure they are aware of any
problems so they can assist you.
2.
If you are still unsatisfied, seek out the owner or
general manager of the dealership.
If your dealer is unable to resolve the problem or the
issue is parts related, please contact:
Great Plains Service Department
1525 E. North St.
P.O. Box 5060
Salina, KS 67402-5060
Or go to www.greatplainsag.com and follow the contact
information at the bottom of your screen for our service
department.
Figure 1
Serial Number Plate
18307
