GREAT PLAINS 1205NT Operator'S Manual Download Page 58 | Manualshive

Page: 58 / 64

GREAT PLAINS 1205NT Operator'S Manual Download Page 58

1205NT

Table of Contents

Appendix A - Reference Information

54

3/7/19

Table of Contents

150-131M

Note: All tires are warranted by the original manufacturer of the tire. Tire warranty information can be found in the

brochures included with your Operator’s and Parts Manuals or online at the manufacturer’s websites. For service

assistance or information, contact your nearest Authorized Farm Tire Retailer.

Manufacturer

Website

                                      Titan                                                                      www.titan-intl.com
                                      BKT                                                                      www.bkt-tires.com/en
                                      Goodyear                                                             www.goodyearag.com
                                      Firestone                                                              www.firestoneag.com
                                      Gleason                                                               www.gleasonwheel.com

Tire Inflation Chart

Tire Size

Inflation PSI

Tire Size

Inflation PSI

7.50 x 20" 4-Ply Drill Rib

28

11L x 15" 6-Ply Rib Implement

28

9.0 x 22.5 10-Ply Highway Service 70

70

11L x 15" 8-Ply Rib Implement

36

9.0 x 24" 8-Ply Rib Implement

40

12.5L x 15" 8-Ply Rib Implement

36

9.5L x 15" 6-Ply Rib Implement

32

12.5L x 15" 10-Ply Rib Implement

44

9.5L x 15" 8-Ply Rib Implement

44

12.5L x 15" 20-Ply Rib Implement

90

9.5L x 15" 12-Ply Rib Implement

60

41 x 15" x 18 - 22-Ply Rib Implement

44

265/70B16.5 NHS Skid Steer

60

395/55B16.5 NHS Skid Steer

60

«
...
56
57
58
59
60
...
»

Summary of Contents for 1205NT

































































Reviews:

No comments