background image

1

Alba Regular - Two Door Cupboard Unit

 L4467

easy

 

- medium

 - hard

Assembly Difficulty

two-person job

A few important pointers before you start:
• 

Please read the instructions right through before you start, and check 
that all the components have been included in the pack; we find 
separating all the hardware into piles makes it easier to be sure that 
everything is present and correct.

• 

Make sure you have the right tools. Allen keys are provided if required, 
but screw drivers and other tools are not. You’ll find details of the tools 
you need at the beginning of the instructions.

• 

Do not throw away any packing materials until assembly is complete, 
just in case you accidentally discard smaller parts or hardware. 

Thank you for shopping with GLTC, we hope you enjoy 

having this product in your home.  
We know assembling furniture, toys or accessories is not everyone’s 
favourite way to spend their time, so we’ve tried to make assembling 
this item as quick and painless as possible. 

Hopefully our efforts will have been worthwhile and you’ll sail 
through the whole process. But if it all feels a bit too much 
like hard work, then we do have an assembly company we 
can recommend: the Flatpack Construction Company offers a 
nationwide service and can be contacted on 

0843  289  4951  or                                          

www.flatpackconstruction.co.uk.

30/08/2019

V2

Summary of Contents for Alba L4467











Reviews: