User Guide, 392-0057 Rev K, DCO G578
Page
7
of
42
Care and Use Instructions
When transporting Kinesia 360, ensure all components are secured in the case to prevent damage.
It is not recommended to store Kinesia 360 in very hot or cold temperatures. If the system has been
stored in an environment lower than 50
F or higher than 90
F, wait at least two hours for the system
to return to room temperature before it is turned on.
Do not expose the system to liquid or excessive moisture to prevent mechanical or electrical damage.
Note:
To prevent the possibility of cross contamination and to maintain hygienic safety, a thorough
cleaning/disinfecting of the system components is required after each patient use.
Use only the following products to safely clean and disinfect the system components:
•
Germicidal disposable wipes (alcohol and bleach free)
•
Alcohol-free glass cleaning fluids
•
Water with mild (neutral pH) soap solutions (do not submerge any equipment, wipe with damp cloth)
•
Dry microfiber cleaning cloth or chamois cloth without oil
•
Static-free cloth wipes
Avoid strong solvents such as alcohol wipes, acetone, ammonium chloride, methylene chloride and
hydrocarbons which can permanently damage the surface of the system components.