manualshive.com logo in svg

GRE PSR-500, Owner'S Manual

Share
Download
GRE PSR-500 Owner'S Manual Download Page 100

GLOB Menu Reference

The GLOB menu stores all of the radio-wide settings used by the 
scanner. The GLOB menu allows you to “tweak” these settings to 
your liking. The default settings will work fine for most users, but 
most users will want to use the GLOB menu to personalize the 
radio to suit their individual tastes. The active parameter is 
always the middle parameter and is indicated by a flashing “

:

”. 

The entire GLOB menu is shown below. Note that some GLOB 
parameter changes do not take effect until the GLOB menu is 
saved.

HINT: 

You can restore all GLOB settings to their defaults without affecting 

your programmed objects or V-Scanners. Power cycle the radio, then 

press 

0

, then 

2

 during the welcome message display. Press 

ENT

 to 

confirm the GLOB parameter reset.

GLOB 

Parameter

Options

Description

CONTRAST

Owner

Clone Send

Alert Mode

Sound Mode

Key Beeps

Light Mode

1-7

Sets LCD contrast. Use 



 keys on 5-way 

pushbutton pad.

SEL

Enters sub menu to set Welcome Message text 
display.

SEL

Press 

SEL

 to send data using clone mode

Both, Tone, Light, Off

Controls the ALERT LED and Audible Alarm 
behavior. Both allows the LED and Tone. Tone 
allows the audible alarm only. Light allows the LED 
only. Off deactivates the ALERT LED and Audible 
Alarm feature.

Key or Stlth

Controls all radio beeps.

On or Off

Controls key beeps.

Norml, Key, Ignre, On, Stlth

Controls the backlight operation. 

Norml

 (Normal) 

uses the backlight key on the keypad. 

Key

 activates 

the backlight when any key is pressed. Ignore 
activates the backlight when a key is pressed, and 
that key

ʼ

s normal function is ignored if the backlight 

is off when it is pressed. On causes the backlight to 
remain on all the time. 

Stlth

 (Steath) disables the 

backlight.

PSR-500 User Manual

Page 

100

Summary of Contents for PSR-500











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands