Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [email protected]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email [email protected] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled waste disposal. Please dis-
pose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Rugged heavy-duty construction
Adjustable width
Ergonomic set screw knob
Integrated hex key holder
2 x 25 kg load capacity
INTRODUCTION
The Gravity T-Bar facilitates mounting two loudspeakers on a single stand. It is made
of heavy-duty steel with a black powder-coating finish and securely attaches to all
35 mm poles. Width is fully adjustable from 31 to 49 cm.
SPECIFICATIONS
Product Type:
mounting fork for speaker stands
Material:
steel
Colour:
black
Surface:
powder-coated
Suitable for Tube Diameter:
35 mm
Width Adjustable:
310 to 490mm
Fasteners:
screw clamp
Max. Load Capacity
2x 25 mm
Weight:
1.4 kg
Interchangeable Rings:
yes
Black Ring Set Included:
yes
Additional Information:
integrated allen key holder
GSAT36B
Adjustable T-Bar For Speaker Stands
Integrated hex key holder
Speakers not included
