Adam Hall GmbH · Adam-Hall-Str. 1· 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [email protected]
SAFETY INFORMATION
1. Please read these instructions carefully before you start instal-
lation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or
other
information from the equipment.
5. Be attentive when setting up the product and protect yourself
from injury.
6. This product is intended for indoor use only. Using it outdoors
could lead to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During
disposal of packaging, please separate plastic and paper/
cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any
warnings, please contact your local distributor.
IMPORTANT INFORMATION AND SAFETY INSTRUCTIONS
SPECIFIC TO THE PRODUCT
Mounting a monitor on the monitor bracket requires suffi-
cient experience in handling technical devices and tools.
In case of doubt, do not carry out the installation alone;
obtain assistance from an experienced technician.
GSA VESA 1
35 MM POLE MOUNT LCD TV MONITOR BRACKET
WITH 7 VESA HOLE PATTERNS
FEATURES
• Quickly and securely mounts monitors to 35 mm speaker poles
• For all flat screens with VESA hole patterns
from 75 x 75 to 400 x 400
• Durable heavy duty construction
• Maximum load capacity 30 kg
• Includes M8 and M6 monitor mounting screws
DESCRIPTION
This universal bracket is suitable for all flat screen monitors with
VESA standard mounting hole patterns from 75 x 75 to 400 x 400
and securely clamps to 35 mm speaker poles. The heavy duty steel
construction with black powder coating finish has a maximum load
capacity of 30 kg and comes complete with sets of M8 and M6
monitor mounting screws.
INSTALLATION
1. Disconnect the monitor from any power source (pull out plug)
and remove all connection cables before installation.
2. Carefully place the monitor with display on a flat surface of
sufficient size and ensure that the display and frame cannot be
damaged (with the help of a second person, as needed). Remove
the pedestal from the monitor (see manufacturer operating instruc-
tions), as necessary.
3A. For the VESA dimensions of 75 x 75, 100 x 100, 200 x 100, and 200
x 200, now place the base plate (without lengthening elements),
with the flat side and flange opening facing downwards, on the
monitor’s rear side in such a way that the screw holes in the base
plate align with the screw threads in the monitor.
3B. For the VESA dimensions of 300 x 300, 400 x 200, and 400 x 400,
first attach the lengthening elements, with the bulge facing the
monitor, in their corresponding positions on the rear side of the base
plate using the provided M6 countersunk screws (ensure that there
is sufficient hold!). Please consult the corresponding drawings in
these instructions for the correct positions. Now lay the base plate
with lengthening elements, with the flat side and flange opening
facing downwards, on the monitor’s rear side in such a way that
the screw holes in the lengthening elements align with the screw
threads in the monitor. If the monitor has a convex rear side, please
also use the provided spacers in order to attach the bracket to the
monitor.
4. Screw down the monitor bracket to the monitor using suitable
screws. When doing so, always follow what is given under IMPORT-
ANT INFORMATION AND SAFETY INSTRUCTIONS SPECIFIC TO THE
PRODUCT in these operating instructions.
5. Now lift the monitor with bracket onto a suitable stand (e.g box
stand) and provided thumb screws.
1. The screws, with which the monitor is attached to the bracket,
must comply with specifications for diameter, length, and threading
in order to avoid damaging the monitor and prevent the monitor
from falling. If the screws provided do not meet these requirements,
suitable screws, which can be obtained from specialists, must be
used (use suitable washers as necessary). If the screws are too long
or if the threading does not comply with the threading of the mon-
itor, the monitor may be damaged. If the screws are too short, the
monitor will not be attached with sufficient strength and may fall.
The screws must be screwed into the corresponding threads of the
monitor for at least 5 full rotations.
2. Follow all instructions in the device operating instructions provid-
ed by the monitor manufacturer with respect to bracket mounting.
3. When screwing tight, do not use excessive force in order to avoid
damaging the monitor.
4. Inspect the screw connections at regular intervals.
5. Use only suitable stands with 35 mm pipe ends and a load ca-
pacity suitable for the monitor plus bracket.
6. If instructions are not followed, there is a risk of injury and device
damage during installation and use of the bracket.
7. Use the monitor, bracket, and stand only for their intended pur-
pose.
8. The manufacturer is not liable for damage caused by improper
installation and use.
9. Verify that the scope of delivery is complete before installation.
SCOPE OF DELIVERY
Stand not included in delivery
