Gravely 994149 Operator'S Manual Download Page 7

EN - 5

SAFETY RULES

The following safety instructions are based 
on the B71.4 specifications of the American 
National Standards Institute and ISO 5395 in 
effect at the time of production.

Keep children and others 

away from unit while unit is 

in operation.

Operating on slopes may 

cause the unit to tip 

unexpectedly. Do not tip 

mower while operating the 

unit. Mow across slopes, not 

up and down.
Look down and behind 

before and while backing.
DO NOT operate on slopes 

over 20°. This maximum 

degree of operation is 

without attachments.
DO NOT operate on slopes 

over 10° when operating 

with attachments.

Read manual, set parking 

brake, remove key and 

remove spark plug before 

you adjust or repair unit.

 6. DANGER!

ALWAYS keep hands and 

feet away from discharge 

chute.

<20°

P

Training

Read, understand, and follow all instructions 
on the machine and in the manuals before 
starting.
Become familiar with the safe operation of 
the equipment, operator controls, and safety 
signs.
Be sure the area is clear of bystanders and 
pets before operating. Stop machine if 
anyone enters the area.
Improper use of power equipment can cause 
serious permanent injury or death to the 
operator or a bystander.
Understand:
• How to operate all controls
• The functions of all controls
• How to STOP in an Emergency
• Braking and steering characteristics
• Turning radius and clearances
Read the Operator’s Manual and other 
training material. If the operator(s) or 
mechanic(s) cannot read English, it is the 
owner’s responsibility to explain this material 
to them.
All operators and mechanics should be 
trained. The owner is responsible for training 
the users.
Never let children or untrained people 
operate or service the equipment. Local 
regulations may restrict the age of the 
operator.
The owner/user can prevent and is 
responsible for accidents or injuries 
occurring to themselves, other people or 
property.

Operator Age

Do not allow children under the age of 18 to 
operate or service any outdoor power 
equipment.
Local regulations may restrict the age of the 
operator.

Summary of Contents for 994149













































Reviews: