GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler Ident. # 0059166 11.2008
28
Graupner
Order No.
4262
Instructions
DISCUS 2 cT
Model glider
for
slope-soaring and aero-tow
This model requires at least a five-channel radio control system.
Specification
Wingspan approx.
3300 mm
Overall length approx.
1415 mm
Wing section
HQ/W 3/11
Tailplane section
HQ/W 0/9
Total surface area approx.
66 dm²
All-up weight according to
fittings, min. approx.
3800 g
Centre of Gravity approx.
80 - 89 mm, measured on either
side of the wing root fairing
Longitudinal dihedral approx.
1.5°
Be sure to read right through the instructions covering assembly and operation
of your model before you attempt to operate it for the first time. You alone are
responsible for the safe operation of your radio-controlled model. Young
people should only be permitted to build and fly this model under the
instruction and supervision of an adult who is aware of the hazards involved in
this activity.
If you have any questions regarding the safe operation of your RC model
aircraft, please turn to your local model shop in the first instance, as the staff
will be pleased to help you.
Radio-controlled model aircraft are very demanding and potentially dangerous
machines, and call for a high level of technical knowledge and skill from the
operator, together with a responsible attitude.
In legal terms our models are classed as aircraft, and as such are subject to
statutory regulations and restrictions which must be observed. Our brochure
“Modellflugrecht, Paragrafen und mehr” (Model Aviation Law, Legal
