GRASS VALLEY zodiak, User Manual

Page: 354 / 458

354 Zodiak User Manual
Section 5 — System Operation
2. Press the E-MEM subpanel keypad number of the desired register.
Alternatively, you can press the
Bank 0
or
Bank 1
to select either of those
banks without using number and Enter keystrokes.
To Run an Effect
With Auto Run Off
1.
Recall the desired effect.
2. Press
Run
.
With Auto Run On
1.
Recall the desired effect. The effect will run as soon as it is recalled.
E-MEM Sequences
To Learn a Sequence of Registers
1. Press
Learn
,
Seq
.
2.
Press the bank and register keypad buttons of the desired registers in
the order you wish them to run.If you wish you can add a delay time at
each register by pressing
Trans Rate
and entering a time value.
3. Press
Learn
.
To Play a Sequence of Registers
1.
Press
Seq
.
2. Press the bank and register keypad button of the starting register.
To Break a Sequence
1.
Press
Learn
,
Seq
.
2. Press the bank and register keypad button of the register to end the
sequence.
3. Press the same bank and register button you just pressed.