manualshive.com logo in svg

GRASS VALLEY zodiak, User Manual

Share
Download
GRASS VALLEY zodiak User Manual Download Page 305

Zodiak User Manual

305

M/E Menus

 

Use the Initial Mix Ends At knob (or select the data pad to bring up a 
numeric keypad) to determine at what point the initial video will end and 
the intermediate video will start. Use the Final Mix Starts At control to 
determine where the intermediate video ends and the final video begins. 
The ratio is set by percentage of the video transition, with 100% being the 
completed transition and zero being the start.

Intermediate Video Settings

In the Intermediate Video Appears data pad, the intermediate video can be 
set to appear either 

Full Screen

 or 

Only On Layers That Change

. Selecting

 Full 

Screen 

enables a full raster of intermediate video to appear during the mix 

transition.

 

Selecting

 Only On Layers That Change 

restricts the intermediate 

video to appear only in layers that change during the mix transition.

In the Intermediate Video Source data pad use the 

Edit Matte

 button to link 

to the M/E Mattes menu (see the 

Matte – M/E Menu on page 270

) where the 

intermediate video source can be selected as Matte or Utility (video). The 
Matte menu will automatically be delegated to the correct M/E.

To use a matte as intermediate video, select the 

Matte

 button in the Base 

Color – Source data pad on the right of the M/E – Matte menu. Matte 
values automatically delegate to the M/E Trans Wipe Border controls. Use 
the matte controls to set the desired matte settings for the intermediate 
video. 

If you wish to use the M/E Utility bus video, select the 

Utility

 button in the 

Base Color – Source data pad. On the Main Control panel, select the 

Utility

 

button in the Key Bus delegate subpanel for the M/E you are using and 
select the desired intermediate video source on the delegated Key bus. 
Refer to 

Key Buses on page 104

.

For more details on setting up and using a Mix Through Video user transi-
tion, refer to 

Mix Through Video Transition on page 386

.

Source Select Menu

A Source Select menu is accessible from the M/E and Keyer menus. The 
Source Select menu is used to change sources in real-time from the Menu 
panel. This menu makes it possible to select sources that are not mapped to 
any source select buttons. Infrequently used sources (like Black or a CG 
logo) may not be mapped on a bus, to free up buttons for use with other 
more important sources. 

Summary of Contents for zodiak











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands