GRASS VALLEY XIP-3901 Page 166 User Manual Download

Page: 166 / 308

166

Configuring the XIP

3901

UDC

IP v1.2 Application with iControl

Status

Status

When Test mode is activated on a channel, the status icon display for that channel will show

the Color Bars & Tone icon.

Options Panel

The following options are available for the XIP

3901

UDC

IP and XIP

3901

UDC

applications:

•

XIP

3901

UDC

HDR:

Enables the card’s HDR conversion function. When this option is

activated, all HDR conversion settings are available. When it is not activated, only the

BT.709 to BT.2020 and BT.2020 to BT.709 settings are available. See also

See

, on page 146 to see all settings available with this option.

•

XIP

3901

UDC-AUD:

Enables the card’s audio probing and processing.

• For the XIP

3901

UDC

IP application, see:

•

Optional XIP

3901

UDC

IP Application Audio processing, Down/Up Mix,

Shuffling

, on page 25 for the feature overview for this licensed option.

•

Audio Panel

, on page 154 to see all settings available with this option.

• For the XIP

3901

UDC

IF application, see:

•

Optional XIP

3901

UDC

IF Application Audio processing, Down/Up Mix,

Shuffling

, on page 29 for the feature overview for this licensed option.

•

Audio Panel

, on page 213 to see all settings available with this option.

To activate an option, you must:

1 Obtain a license key for the option from Grass Valley.
2 Open the Options panel and select the appropriate tab.
3 Type the license key in the Enter key box.
4 Click

Enable option

to enable the option’s features.

Format

Set video test pattern format for 1080p & 2160p Video outputs:

•

SDR BT.709 (75%):

75% Color bar with 75% white

•

HLG BT.2110-0:

Test pattern HLG narrow range as per ITU-R BT.2111-0

•

PQ Narrow BT.2111-0:

Test pattern PQ narrow range as per ITU-R BT.2111-0

•

PQ Full BT 2111-0:

Test pattern PQ full range as per ITU-R BT.2110-0

Property

Description

Test Pattern

Operating Mode

Icon

Enabled

Color Bars & Tone

Disabled

Process

Summary of Contents for XIP-3901





















































































































































































































































































































Search results

Summary of Contents for XIP-3901

Reviews:

Related manuals for XIP-3901

Brands by name

Popular brands

GRASS VALLEY XIP-3901, User Manual

Search results

Summary of Contents for XIP-3901

Reviews:

Related manuals for XIP-3901

Brands by name

Popular brands