GRASS VALLEY TRINIX NXT -, Installation Manual

Page: 212 / 449

212 Trinix NXT — Installation and Service Manual
Section 10 — Hardware Installation
Frame Number Settings
Setting the Frame for Input or Output Blocks
Figure 123.
Up to 16 Trinix frames can be configured to operate as a single router. The
FRAME rotary switch on the rear panel is used to indicate the relative posi-
tion of each individual frame to the input-output matrix.
The FRAME bits (4) are decoded to determine which inputs and outputs
correspond to the frames. Refer to the following tables for input and output
relation to the FRAME bits.
Table 47. Frame Numbering
*The 128X256 router is a subset of the 256X256 router and it operates as a
partially stuffed 256X256 system.
TRX-NXT-128x128 TRX-NXT-128x256* and TRX-NXT-256x256
FRAME NUMBER FRAME NUMBER
INPUTS INPUTS
385-512* 5 7 13 15 769-1024* 5 7 13 15
257-384* 4 6 12 14 513-768* 4 6 12 14
129-256* 1 3 9 11 257-512* 1 3 9 11
1-128* 0 2 8 10 1-256* 0 2 8 10
OUTPUTS
1-
128* 129-
2556* 257-
384* 385-
512*
OUTPUTS
1-
256* 257-
512* 513-
768*
769-1024*
12
0
1
2
3
4
5
6
7
8
9
10
11
13
14
15
FRAME
*For Jupiter-controlled (0-based) systems, subtract one (1) from these input/output numbers.