GRASS VALLEY TRINIX NXT -, Installation Manual

Page: 13 / 449

Trinix NXT — Installation and Service Manual 13
Safety Summary
Use proper power cord
— Use only the power cord supplied or specified for
this product.
Ground product
— Connect the grounding conductor of the power cord to
earth ground.
Operate only with covers and enclosure panels in place
— Do not operate this
product when covers or enclosure panels are removed.
Use correct fuse
— Use only the fuse type and rating specified for this
product.
Use only in dry environment
— Do not operate in wet or damp conditions.
Use only in non-explosive environment
— Do not operate this product in an
explosive atmosphere.
High leakage current may be present
— Earth connection of product is essential
before connecting power.
Dual power supplies may be present
— Be certain to plug each power supply
cord into a separate branch circuit employing a separate service ground.
Disconnect both power supply cords prior to servicing.
Double pole neutral fusing
— Disconnect mains power prior to servicing.
Use proper lift points — Do not use door latches to lift or move equipment.
Avoid mechanical hazards
— Allow all rotating devices to come to a stop before
servicing.
Cautions
The following caution statements identify conditions or practices that can
result in damage to equipment or other property:
Use correct power source
— Do not operate this product from a power source
that applies more than the voltage specified for the product.
Use correct voltage setting
— If this product lacks auto-ranging power sup-
plies, before applying power ensure that the each power supply is set to
match the power source.
Provide proper ventilation
— To prevent product overheating, provide equip-
ment ventilation in accordance with installation instructions.
Use anti-static procedures
— Static sensitive components are present which
may be damaged by electrostatic discharge. Use anti-static procedures,
equipment and surfaces during servicing.
Do not operate with suspected equipment failure
— If you suspect product damage
or equipment failure, have the equipment inspected by qualified service
personnel.