GRASS VALLEY T2 Elite User Manual Download Page 98

Page: 98 / 273

(17)

[P.List] / [T.Line]

Indicates the name of the loaded playlist.

Tapping the entry area allows to change the

playlist name.

Software keyboard

►

P133

[P.List]

Playlist in the normal format.

[T.Line]

Playlist in the timeline format.

Changing the playlist type

►

P182

(18)

[Current Event:]

Displays the information of the event being

played.

[In:]/[Out:]/[Dur:]

Indicates the timecode of In/Out points and

the length of the event (duration).

[Format:]

Indicates the video size and frame rate.

(19)

Event list

Displays the list of events in the playlist.

The selected event is displayed with a blue

frame.

The event being played is highlighted in

blue.

(20)

1ch view/3ch view/
bin/transfer screen
common area

1ch view/3ch view/bin/transfer screen
common area

►

P50

Operation buttons of P1/P2 channel (playlist view)

(2)

(4)

(6)

(3)

(5)

(1)

(1)

[Clear (In/Out)]

In the TRIM mode, clears In/Out points set

on the event to cancel the TRIM mode.

(2)

[Cue(In)]

Moves to the In point of the event.

(3)

[Mark(In)]

In the TRIM mode, sets In point to the

current position. After In point has been

set, the In point icon appears on the

scrubbing bar.

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual

May 16, 2016

Section 8 ― Playing/Editing

Summary of Contents for T2 Elite


















































































































































































































































































Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands

GRASS VALLEY T2 Elite, User Manual

Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands