5
Tap [FTP Server], select the FTP server of T2 (destination), and
then tap [OK].
6
Tap [Start].
Export starts. You can check the progress in the transfer screen.
Uploading files to T2/downloading files from T2
You can use FTP server to connect devices or edit terminals to your T2 and
upload/download files.
NOTE
•
For the following format files, only single files can be
uploaded/downloaded.
-
XDCAM: MXF file
-
XDCAM EX: *.mp4 file, *.avi file
-
XAVC: MXF file
-
XAVC S: MP4 file
-
P2 AVC-ULTRA: MXF
(
OP-1a) file
-
GF: MXF file
•
When uploading files to T2 via FTP, if [File format after
import:] is set to [AVI(HQ)] for the transfer setting of each
format, the files will be converted to Grass Valley HQ AVI after
uploaded.
•
If you want to use Japanese for file names, you must set
the character set of file names to UTF-8 on the FTP client
side beforehand. Correct file names cannot be displayed if
the character sets do not match. The configuration method
depends on your software. Refer to the help etc.
1
Tap [Config.].
You can operate it from the bin view, 1ch view, 3ch view, and transfer
screen.
2
Tap [General], and then tap the [Network-1] tab or [Network-2]
tab.
3
Configure the IP address and DNS server address.
General – Network-1/Network-2 settings
4
Tap the [FTP] tab.
75
May 16, 2016
T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual
Uploading files to T2/downloading files from T2
