BVW list supporting remote mode
The BVW commands available when controlling T2 from an external controller in the R1-remote
mode and P1/P2-remote mode are listed in the following table.
: Supported,
: Not all supported,
: Not supported
Command
R1
P1/P2
DEVICE TYPE REQUEST
STOP
PLAY, SYNC PLAY
RECORD
STANDBY OFF
STANDBY ON
FAST FWD
JOG FWD
VAR FWD
SHUTTLE FWD
REWIND
JOG REV
VAR REV
SHUTTLE REV
CUE UP WITH DATA
ANTI-CLOG TIMER DISABLE
ANTI-CLOG TIMER ENABLE
TIMER-1 PRESET
TIMER-1 RESET
TIMER MODE SELECT
CURRENT TIME SENSE
*1
TIMER-1 DATA
LTC TIME DATA
LTC TIME & UB DATA
LTC UB DATA
VITC TIME DATA
VITC TIME & UB DATA
VITC UB DATA
REQUEST TIME MISSING
STATUS SENSE
COMMAND SPEED SENSE
TIMER MODE SENSE
REC
*1 If you query the timecode, R1 returns the timecode currently being input. For CURRENT TIME
SENSE, the type of timecode to query can be specified (LTC/VITC). Whichever is specified, the
timecode type set in T2 (the timecode type selected in [Select Timecode] in [R1] -> [Timecode &
Remote] on the setting screen) is returned.
272
T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual
May 16, 2016
Section 12 ― Appendix