GRASS VALLEY T2 Elite User Manual Download Page 195

Page: 195 / 273

General – FTP settings

You can configure FTP settings when T2 is used as FTP server, or
the destination when external FTP server is used for a file transfer

destination.

Tap [General], and then tap the [FTP] tab in the setting screen.

[FTP] tab

[FTP Server]

Displays the FTP settings when T2 is used as FTP

server.

[Settings...]

By tapping, configures FTP settings for T2.
Tapping it displays the FTP setting dialog box for

T2 to configure the settings.

FTP setting dialog box for T2

►

P196

[Start]

Sets and uses T2 as FTP server.

[Stop]

Releases the setting and stops using T2 as FTP server.

[Limit the FTP transfer rate while recording or playing.]

By checking, automatically restricts FTP transfer

rate while recording or playing. Tapping the entry

area allows to change the limit value of the transfer

rate. Different limit values can be specified for

uploading and downloading, and when uploading

and downloading are performed simultaneously,

the transfer rate will be the double of the set value.
If this option is unchecked, the recording/

playback operations may not be performed

normally, therefore, we recommend that you use

the system with this option checked.

195

May 16, 2016

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual

General settings

Summary of Contents for T2 Elite


















































































































































































































































































Search results

Summary of Contents for T2 Elite

Reviews:

GRASS VALLEY T2 Elite, User Manual, Page: 195 / 273

Search results

Summary of Contents for T2 Elite

Reviews: